Install Bitcoind Ubuntu · GitHub

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

How to run Bitcoin Core 0.20.0 on Ubuntu Server 20.04 LTS using a Raspberry Pi 4 (or Virtual Machine)

I was helping someone on twitter with this so I figured I'd share the information here as well so that other people would have an easier time than I did.
I'm going to explain how to do this setup on a Raspberry Pi, but note that this should work on a VM as well. You can also set up and run the node headless this way, but I will be explaining how to set up the node using a monitor that you can then later disconnect and access remotely once everything is setup.
Hardware:
-Raspberry Pi 4 (2GB RAM minimum) preferably 4GB RAM -Raspberry Pi 4 Heatsinks -Raspberry Pi 4 case -Micro HDMI cable -USB-C power cable and wall adapter -Monitor -Keyboard and mouse -Ethernet cable (Optional) -16GB or larger microSD card -500GB or larger external hard drive (SSD or portable)
Node Requirements: -50 KBps upload internet speeds (Most people should have this) -Unlimited or high data cap internet download/upload service -6 hours or longer per day dedicated run time
Okay, once you have the hardware its time to get started!
The first thing you'll need to do is install the Raspberry Pi imager, this is how we're going to install Ubuntu onto our Raspberry Pi. After your download and install finishes, open the imager.
  1. Click the "choose OS" box and from the list select Ubuntu, then select Ubuntu Server 20.04 LTS (Raspberry Pi 2/3/4).
  2. Insert your microSD card to your computer directly or via a USB converter. Click "choose SD card" and select your inserted microSD card.
  3. Click "Write" and wait for the imager to finish flashing the OS onto your card
When it is done, remove the SD card and reinsert it to access the files installed. You can choose the overclock the Raspberry Pi by editing the config file. To connect to the Raspberry Pi remotely, you'll need to create an SSH file. If you're on windows this is pretty easy. In the File Explorer, highlight the address bar at the top, erase the text and type cmd, press enter and the Command Prompt will pop up. Type the following:
echo\ssh
This will create an SSH file in your SD directory so that you can remote access the Rasberry Pi later. Now you can go ahead and eject the SD card from your computer.
Now we can set up the Raspberry Pi
Go ahead and connect all your peripherals to your Raspberry Pi, insert the microSD, and connect it to power to turn it on. Give it a moment to boot up, then when prompted enter "ubuntu" for the password. It will make you change the password. Afterward, it will print a bunch of information to the screen, write down the IPv4 address, this is the IP address you'll use to remote access the Raspberry Pi. Now, at any time you can remote access your Raspberry Pi by entering a terminal on another PC in your network and typing:
ssh [email protected](your IP address)
The next step is to install a desktop. There are plenty to choose from so feel free to use a different one than what I use, you can also choose to ignore this and to just work from in the terminal from this point forward.
You need to update all the repositories so type: (Note you'll either have to be connected by ethernet or have edited the network-config file to setup your wifi in advance)
sudo apt-get update
Once it's done updating type the following to upgrade your system:
sudo apt-get upgrade
Now that you're up-to-date, you can install the desktop using the command:
sudo apt-get install ubuntu-gnome-desktop
This will take a while to download and install so just sit back and let it do its thing. Once it's done downloading, restart your Raspberry Pi and log in with the password you changed earlier. Your first boot may take a while so just be patient, don't freak out if you see a single purple square in the center of the screen while it's loading. You should now have the Ubuntu desktop ready to go and now it's on to installing Bitcoin Core!
Installing Bitcoin Core 0.20.0
Since we're running Ubuntu Server 20.04 LTS, it should come preinstalled with the Snap Store. This makes installing apps very easy and works similar to pip install in Python. Simply open your terminal and type:
sudo snap install bitcoin-core
This will install Bitcoin Core into your Snap folder and will add the application to your system. Unfortunately, there are still a few steps left before we can begin downloading the blockchain. By default, Bitcoin Core doesn't have the removable-media Plug connected to the Socket. You can view this by typing:
snap connections bitcoin-core
This means when you try installing everything onto your external hard drive, Bitcoin Core won't be able to identify it or write to it even when passed the directory path. To fix this first locate your Snap folder, make a copy of the bitcoin-core folder inside, and paste it into your external drive.
NOTE: You must make a copy, you can't just move the snap file to the external drive.
Now, you can connect the removable-media Plug to the Socket by typing:
sudo snap connect bitcoin-core:removable-media :removable-media
This gives you the read/write permissions necessary to access the /media path. Finally, you can now launch Bitcoin Core and select "use a custom directory path" when prompted. Highlight the current directory path and replace it with the path to your external hard drive, it should look something like this:
/media/(external drive)/bitcoin-core/common/.bitcoin
This is why we had to make a copy of the bitcoin-core folder to the external drive earlier, the Bitcoin Core application will create the new data directory through ".bitcoin". Hit "Okay" and the application will begin synchronizing with the network! Once the synchronization is finished your very own node will be up and running!
EDIT: (08/01/2020) Bitcoin Core 0.20.01 has been released, I will update the tutorial soon with how to run the latest release.
submitted by Noblefire_62 to Bitcoin [link] [comments]

Running a Bitcoin node on a $11.99 SBC

Running a Bitcoin node on a $11.99 SBC
Just wanted to let you guys know that I'm successfully running a (pruned) Bitcoin node + TOR on a $11.99 single board computer (Rock Pi S).
The SBC contains a Rockchip RK3308 Quad A35 64bit processor, 512MB RAM, RJ45 Ethernet and USB2 port and I'm using a 64GB SDCard. It runs a version of Armbian (410MB free). There's a new version available that even gives you 480MB RAM, but I'm waiting for Bitcoin Core 0.19 before upgrading.
To speed things up I decided to run Bitcoin Core on a more powerful device to sync the whole blockchain to an external HDD. After that I made a copy and ran it in pruned mode to end up with the last 5GB of the blockchain. I copied the data to the SD card and ran it on the Rock Pi S. After verifying all blocks it runs very smoothly. Uptime at the moment is 15 days.
I guess you could run a full node as well if you put in a 512GB SDcard.
The Rock Pi S was sold out, but if anybody is interested, they started selling a new batch of Rock Pi S v1.2 from today.
Screenshot of resources being used
Bitcoin Core info
Around 1.5 GB is being transferred every day
---
Some links and a short How to for people that want to give it a try:
  1. This is the place where I bought the Rock Pi S.
  2. Here you find more information about Armbian on the Rock Pi S. Flash it to your SDCard. Follow these instructions.
  3. Disable ZRAM swap on Armbian. If you don't do this eventually Bitcoin Core will crash. nano /etc/default/armbian-zram-config ENABLED=false
  4. Enable SWAP on Armbian sudo fallocate -l 1G /swapfile sudo chmod 600 /swapfile sudo mkswap /swapfile sudo swapon /swapfile sudo swapon --show sudo cp /etc/fstab /etc/fstab.bak echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab
  5. Set up UFW Firewall sudo ufw default deny incoming sudo ufw default allow outgoing sudo ufw allow ssh # we want to allow ssh connections or else we won’t be able to login. sudo ufw allow 8333 # port 8333 is used for bitcoin nodes sudo ufw allow 9051 # port 9051 is used for tor sudo ufw logging on sudo ufw enable sudo ufw status
  6. Add user Satoshi so you don't run the Bitcoin Core as root sudo adduser satoshi --home /home/satoshi --disabled-login sudo passwd satoshi # change passwd sudo usermod -aG sudo satoshi # add user to sudo group
  7. Download (ARM64 version) and install Bitcoin Core Daemon
  8. Download and install TOR (optional). I followed two guides. This one and this one.
  9. Create a bitcoin.conf config file in the .bitcoin directory. Mine looks like this: daemon=1 prune=5000 dbcache=300 maxmempool=250 onlynet=onion proxy=127.0.0.1:9050 bind=127.0.0.1 #Add seed nodes seednode=wxvp2d4rspn7tqyu.onion seednode=bk5ejfe56xakvtkk.onion seednode=bpdlwholl7rnkrkw.onion seednode=hhiv5pnxenvbf4am.onion seednode=4iuf2zac6aq3ndrb.onion seednode=nkf5e6b7pl4jfd4a.onion seednode=xqzfakpeuvrobvpj.onion seednode=tsyvzsqwa2kkf6b2.onion #And/or add some nodes addnode=gyn2vguc35viks2b.onion addnode=kvd44sw7skb5folw.onion addnode=nkf5e6b7pl4jfd4a.onion addnode=yu7sezmixhmyljn4.onion addnode=3ffk7iumtx3cegbi.onion addnode=3nmbbakinewlgdln.onion addnode=4j77gihpokxu2kj4.onion addnode=5at7sq5nm76xijkd.onion addnode=77mx2jsxaoyesz2p.onion addnode=7g7j54btiaxhtsiy.onion ddnode=a6obdgzn67l7exu3.onion
  10. Start Bitcoin Daemon with the command bitcoind -listenonion
Please note that I'm not a professional. So if anything above is not 100% correct, let me know and I will change it, but this is my setup at the moment.
submitted by haste18 to Bitcoin [link] [comments]

Is installing and compiling libraries as extremely frustrating and impossible for others as it is for me?

I don't know if it's my unconventional programming setup (VirtualBox Ubuntu 18), but I have never been able to simply follow the steps to compile a project or application without major problems happening.
Here are all some examples from me trying to build openpose tonight. It's what prompted me to make this post:
  1. Cmake must be updated because, for some reason, the default apt-get cmake is still the version from 2017!
  2. I had to specifically install python3.7-dev instead of python 3.6-dev even though everyone builds openpose with python3.5-dev (which I couldn't install).
  3. I had to mix and match commands from three different tutorials because following just one of any of them resulted in errors.
  4. Openpose would not compile because there was a typo in one of the third-party libraries that I found out only after diving deep into github. I had to vim and manually edit the source code to fix this one.
This sounds a bit whiny, and it may just be only to whine. But is this really how major packages are dealt with?
This is just one example, a month ago I spent a whole day just to compile a library by Google called mediapipe. In between these examples have been dozens of other libraries and packages where following the instructions was not sufficient and I needed to dive deep into terminology way above my head to try and debug some stupid problems and it seems to not be getting easier with time.
It just seems like such a major headache and the solutions are so arcane that I can't fathom how anyone even came up with them? It just looks like: Oh, simply apt-get llldldlepellelpv=3.5 the lllldldldelep3.5.1 has the bug on line 3,884 and then copy it into this other directory and make sure it's not done past 2PM otherwise you also have to meet this dependency by sacrificing your 3rd most valued possession by chucking it out of the 4 story apartment (incompatible with non-4-story apartments). This result will then be the 5th post on stack overflow and the only one that works. The others just reiterate the exact things you've already tried in judgemental tones or just go off the deep end completely with some insane-tier fixes, including running overcomplicated batch scripts they made which who knows what they do other than probably remotely install a bitcoin miner.
Plus not to mention that I'm trying to code with some of my classmates and the outcome of each of our slightly different setups results in every possible combination of bugs. No single set of instructions will make a major library compile on all of our ubuntu setups.
The setup of libraries (not even talking about incorporating them into my own project so that mine will compile alongside them) is just an extremely frustrating process. What are the secrets to doing it right and being able to know which magic commands fix the bugs?
submitted by Ari2010 to learnprogramming [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

An Idiots (me) Guide To Installing A Citizen Node.

An Idiots (me) Guide To Installing A Citizen Node.
So I dusted off an old laptop and have compiled a how-to install the Iconloop Engine and Iconservice on Linux and OSX. The directions on github are very good but there are a few issues with OSX and Xcode. Here is my simple how to with work arounds for Xcode on OSX and simple compiling for OSX. I will edit this as need be and it isn't exhaustive but rather a good solid how-to for anyone that wants to play around with our favorite open source project. Some of the packages for Ubuntu took a little searching and I hope this saves somebody some time.
Have a great day.
*Linux:*
Install make tools, rabbitmq-server, opensssl, pkg-config
$ sudo apt install automake pkg-config libtool rabbitmq-server openssl
Install libsec256k1-0 $ sudo apt-get install libsecp256k1-0
Python3:
$ sudo apt-get install python3 $ sudo apt-get install python3-distuttils $ sudo apt-get install python3-set-proctitle $ sudo apt-get install python3-devel
LevelDB: Linux
$ sudo apt-get install libsnappy-dev
$ export VER="1.20"
$ wget https://github.com/google/leveldb/archive/v1.20.tar.gz
$ tar xvf v1.20.tar.gz
$ rm -f v$1.20.tar.gz
$ cd leveldb-$1.20
$ make
$ sudo scp -r out-static/lib* out-shared/lib* "/uslocal/lib"
$ cd include
$ sudo scp -r leveldb /uslocal/include
$ sudo ldconfig
Loopchain Engine:
Download zip: https://github.com/icon-project/loopchain Unzip
$ cd /home/useDownloads $ ls-la $ cd /loopchain-master install libtolls-bin otherwise make won't work. $ sudo apt install libtool-bin $ service rabbitmq-service start $ source venv/bin/activate $ (venv)$ ./build.sh $ make setup $ make install $ loop citizen -r testnet
Apply passcode when prompted
Iconloop engine now running.
$ virtualenv -p python3 venv
Setting up Icon Service # Create a working directory $ mkdir work $ cd work
# Setup the python virtualenv development environment $ virtualenv -p python3 venv $ source venv/bin/activate
# Install the ICON SCORE dev tools (venv) $ pip install iconservice
*OSX:*
Xcode: You'll need Xcode 9.4 from Apple Developer, lstdc++ is deprecated. Manually link library from Xcode 9.4
cp /Applications/Xcode9.4.app/Contents/DevelopePlatforms/iPhoneOS.platform/DevelopeSDKs/iPhoneOS.sdk/uslib/libstdc++.* /Applications/Xcode10.app/Contents/DevelopePlatforms/iPhoneOS.platform/DevelopeSDKs/iPhoneOS.sdk/uslib/
For Simulator :
cp /Applications/Xcode9.4.app/Contents/DevelopePlatforms/iPhoneSimulator.platform/DevelopeSDKs/iPhoneSimulator.sdk/uslib/libstdc++.* /Applications/Xcode10.app/Contents/DevelopePlatforms/iPhoneSimulator.platform/DevelopeSDKs/iPhoneSimulator.sdk/uslib/
Install Homebrew
Manually install bitcoin-core/secp256k1
https://github.com/bitcoin-core/secp256k1
cd /path/to/download
$ ./autogen.sh $ ./configure $ make $ ./tests $ sudo make install
For OSX follow the directions at the project after you have shared Xcode libraries from 9.4 to the current Xcode per the instructions above.
Any feedback most helpful.
https://preview.redd.it/qpp3v7dxflf21.png?width=1366&format=png&auto=webp&s=e5ebc3ea7e59700e111223c63c3b683cc573d6a9
submitted by 1_2_123 to helloicon [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Creating a Headless Staking Node on Ubuntu 18.04

Creating a Headless Staking Node on Ubuntu 18.04
##UPDATE## Step 8 - Option 2, has some bugs in the final build process. i haven't had time to work them out yet!

This guide will take you through building and running a headless x42 Full Node! The OS I am using here is Ubuntu 18.04, this guide picks up from a complete/fresh ubuntu install.
This is meant to setup a staking node and so this guide will run you through building, configuring and setting up staking. It will not cover sending transactions or anything else.
The things we are going to do:
  • Step 1 - Install .net core
  • Step 2 - Download The x42 Node Source & Compile It
  • Step 3 - Setting The x42 Node Up To Run On Boot
  • Step 4 - Setup A New Wallet
  • Step 5 - Configure The x42 Daemon
  • Step 6 - Get Address
  • Step 7 - Check Balance
  • Step 8 - Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node # BROKEN#

Step 1 - Install .net Core

Here is the reference link:
https://dotnet.microsoft.com/download/linux-package-manageubuntu18-04/sdk-current
Register Microsoft Key’s & Install Their repos:
cd /tmp wget -q https://packages.microsoft.com/config/ubuntu/18.04/packages-microsoft-prod.deb sudo dpkg -i packages-microsoft-prod.deb sudo add-apt-repository universe sudo apt -y install apt-transport-https sudo apt update sudo apt -y install dotnet-sdk-2.2 
Microsoft collect telemetry data by default, if you are part of the “tin foil hat brigade” you can set the following environment variable to turn it off:
echo "DOTNET_CLI_TELEMETRY_OPTOUT=1" >> /etc/environment 
now you should be at a point where .net core is installed on your system… that wasn’t so hard was it! You can check by running the following command:
dotnet--list-sdks 
The output should look like this:
$ dotnet --list-sdks 2.2.103 [/usshare/dotnet/sdk] 

Step 2 - Download & Compile The x42 Node

This part assumes you have GIT installed, if not:
apt -y install git 
Now to pull down the source and compile it!
cd ~/ git clone https://github.com/x42protocol/X42-FullNode.git # “cd” into the source folder cd X42-FullNode/src/ 
Now .net core uses NuGet for package management, before we compile, we need to pull down all of the required packages.. its as simple as running (this will take a couple of minutes) inside of “X42-FullNode/src/”:
dotnet restore 
now we are ready to compile the source, execute (inside of “X42-FullNode/src/”):
dotnet build --configuration Release 
ignore the yellow warnings, this is just the rosyln compiler having a grumble.. if you get red ones then something went wrong! The “--configuration Release” will strip out all debug symbols and slim things down.. only a little, this optional parameter is not mandatory.
Once this is done everything is built/compiled, you can run the daemon directly from the repository, this can be done by going to:
cd ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1 dotnet x42.x42D.dll 
this will kick off the node, however if you exit SSH at this time it will kill the process! however I always recommend copying out the binaries to a separate folder. This can be done with the following:
mkdir ~/x42node mv ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1/*.* ~/x42node/ 
now we have everything we need to run the node outside the git repository! What we need to do now is run the node and have it create the default x42.conf file.. so
cd ~/x42node dotnet x42.x42D.dll 
feel free to hit “CTRL + C” to exit the application after a couple of seconds, by then the folders/files would have been created at the following path:
~/.x42node/x42/x42Main/ 

Step 3 - Setting The x42 Node Up To Run on Boot

Now we are going to create a service file so our x42 node automatically starts when the system is rebooted.
THINGS TO NOTE ABOUT BELOW.. CHANGE THE ##USER## to the username your currently using as these files are within your home directory!
We need to drop to root for this..
sudo -i cat < /etc/systemd/system/x42node.service [Unit] Description=x42 Node [Service] WorkingDirectory=/home/##USER##/x42node ExecStart=/usbin/dotnet /home/##USER##/x42node/x42.x42D.dll Restart=always # Restart service after 10 seconds if the dotnet service crashes: RestartSec=10 SyslogIdentifier=x42node User=##USER## Environment=ASPNETCORE_ENVIRONMENT=Development [Install] WantedBy=multi-user.target EOF 
To enable the service, run the following (as the root user):
systemctl enable x42node.service 
BOOM.. the node isn’t running yet.. but next time the system restarts it will automatically run!
now lets exit out of root!
exit 
We can now start the node up and begin downloading blocks, by running the following command:
sudo systemctl start x42node.service 
if you want to check its loaded and see some of the output, you can run:
sudo systemctl status x42node.service 
an example of the output:
$ sudo systemctl status x42node.service ● x42node.service - x42 Node Loaded: loaded (/etc/systemd/system/x42node.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-01-24 15:47:55 UTC; 14s ago Main PID: 5456 (dotnet) Tasks: 23 (limit: 1112) CGroup: /system.slice/x42node.service └─5456 /usbin/dotnet /home/darthnoodle/x42node/x42.x42D.dll Jan 24 15:48:09 x42staking x42node[5456]: Batch Size: 0 Mb (0 headers) Jan 24 15:48:09 x42staking x42node[5456]: Cache Size: 0/50 MB Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: =======Mempool======= Jan 24 15:48:09 x42staking x42node[5456]: MempoolSize: 0 DynamicSize: 0 kb OrphanSize: 0 Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:86.184.76.255]:52342' connected (outbound), agent 'x42:1.2.13 (70012)', height 213920 Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:86.184.76.255]:52342' offline, reason: 'Receiving cancelled.'. All node screen output can be found in the /valog/syslog file. 

Step 4 - Setup a New Wallet

With the Node running, we now need to setup and/or restore a wallet!
Everything will be performed through the API’s, however by default these API’s are listening on localhost (127.0.0.1), if you are connecting in remotely then this would be a problem since you cant hit that IP. The solution, SSH TUNNEL!
Execute the following command on your local system:
ssh -L 42220:localhost:42220 @ 
This binds the local port (on your system) with 127.0.0.1:42220 on the remote system, once you have executed the command you can type the following address in your laptop/desktop’s web browser and be able to access the API’s:
http://127.0.0.1:42220/swaggeindex.html 
It should look something like this:
https://preview.redd.it/9lzeg3vob8d21.jpg?width=482&format=pjpg&auto=webp&s=b5d574998816056140d5d6de7b03c56772a892fe
To Create a new wallet, first we have to generate some mnemonic works (e.g. the seed), you can do that by going to the following API:
/api/Wallet/mnemonic 
Hit the “Try it out” button which then prompts you for 2 fields:
https://preview.redd.it/dvbdllfrb8d21.jpg?width=722&format=pjpg&auto=webp&s=766d14bafba6facbcd56d31c63c0012748e682e5
Enter “English” and I would recommend 24 words as this greatly increases the seed strength! Once that is done you hit execute and then scroll down to see the “Response Body”, this should contain the mnemonic which you are going to use to create the wallet! This looks something like below:
https://preview.redd.it/6p4q0rsub8d21.jpg?width=603&format=pjpg&auto=webp&s=44b9265626467a43ca670b134c4d28187f475c2e
THIS IS VERY IMPORTANT, BACKUP THIS MNEMONIC TO A SAFE SECURE LOCATION THAT IS ENCRYPTED!!!
So now we have our mnemonic, its time to generate the wallet, for this we need to use the API:
/api/Wallet/create
There are a number of parameters which are required in order to create a wallet:
WalletCreationRequest{ mnemonic string password* string passphrase* string name* string } 
It should be noted that the password and mnemonic are is the most important parts of this request where the “password” will encrypt the wallet and Is required to unlock it.
  • Hit the “Try it out” button
  • input the necessary data
  • Insert the mnemonic
  • Put a password & passphrase
  • “Name” is what your wallet will be called
It should look something like the following:
https://preview.redd.it/958ttfbxb8d21.jpg?width=603&format=pjpg&auto=webp&s=ce48336436ea4b469b5e87513da802de0bf444ee
Hit “Execute”, the “Loading” sign may spin for a few minutes while the wallet is created… once the wallet has been created the “Response Body” will return the mnemonic you have just used.. we now have a wallet!!
HOWEVER IT IS NOT LOADED INTO THE NODE JUST YET!
This is where we will now jump back out and to configure the node to automatically load the wallet and automatically start staking when it first loads.
AGAIN BACKUP YOUR MNEMONIC AND PASSWORD, MAKE SURE THEY ARE ENCRYPTED AND STORED SOMEWHERE SAFE!

Step 5 - Configure The x42 Daemon

Now we are going to modify the x42.conf file in order to automatically load our wallet and start staking 😊
First things first, lets stop our node by running the following command:
sudo systemctl stop x42node.service 
CD to the following folder and view its contents:
~/.x42node/x42/x42Main ls -lah 
within that folder there should be 2 files you are interested in:
-rw-r--r-- 1 darthnoodle darthnoodle 18K Jan 28 16:01 TestWallet.wallet.json -rw-rw-r-- 1 darthnoodle darthnoodle 3.1K Jan 24 15:25 x42.conf 
So TestWallet.wallet.json is our physical wallet that will be loaded, but for right now we want to modify the x42.conf file.. fire up your favourite text editor (if you use VI you’re a masochist)..
nano x42.conf 
The area we are interested in is the following:
####Miner Settings#### #Enable POW mining. #mine=0 #Enable POS. #stake=0 #The address to use for mining (empty string to select an address from the wallet). #mineaddress= #The wallet name to use when staking. #walletname= #Password to unlock the wallet. #walletpassword= #Maximum block size (in bytes) for the miner to generate. #blockmaxsize=1000000 #Maximum block weight (in weight units) for the miner to generate. #blockmaxweight=1000000 #Enable splitting coins when staking. #enablecoinstakesplitting=1 #Minimum size of the coins considered for staking, in satoshis. #minimumstakingcoinvalue=10000000 #Targeted minimum value of staking coins after splitting, in satoshis. #minimumsplitcoinvalue=10000000000 
Uncomment (remove the #) of the following lines and change their value:
stake=1 (changed to 1) walletname=TestWallet (changed to our Wallet Name) walletpassword=password123 (changed to the wallet password) 
save the file and exit back to the command prompt, now we shall restart the node with the following command:
sudo systemctl status x42node.service 
now the wallet is automatically loaded and ready for action!
YES I KNOW YOU HAVE PUT YOUR PASSWORD IN CLEARTEXT, THIS IS WHERE YOU SHOULD HARDEN YOUR BOX. IF THEY CAN GET TO THE POINT WHERE THEY CAN READ YOUR CONF FILE THEY CAN JUST GRAB YOUR WALLET AND BRUTEFORCE THE PASSWORD.
You can check its loaded by going back to the API and executing the following command:
/Dashboard 
Or execute the following command on the NODE:
curl -X GET "http://127.0.0.1:42220/Dashboard" -H "accept: application/json" 
both will produce the same output, if you scroll to the bottom you should see something like this:
======Wallets====== TestWallet/account 0, Confirmed balance: 0.00000000 Unconfirmed balance: 0.00000000 
This means the wallet is loaded and ready for action!!

Step 6 - Get Addresses

Next thing you are probably going to want is a receive address and to check the balance and TX history.. so lets start with getting an address!
Go to the following API:
/api/Wallet/unusedaddress 
Fill in the Wallet name which is “TestWallet” (in this example) and “account 0” (which is the first/default account):
https://preview.redd.it/ayri5jk0c8d21.jpg?width=602&format=pjpg&auto=webp&s=2d16bbb78da49c0125d24d0834c9454d702cb7a1
Hit execute and you should have an x42 address within the “Response Body”:

https://preview.redd.it/tmc495j3c8d21.jpg?width=349&format=pjpg&auto=webp&s=b00177f66a9e24c980d3c6d4e532a33cbf3fb0bc
BOOM… ok now we can receive funds! 😊

Step 7 - Check TX History

Go to the API and the following call:
/api/Wallet/history 
The 2 fields we are most concerned about are:
https://preview.redd.it/lw194af6c8d21.jpg?width=602&format=pjpg&auto=webp&s=27e264bc008879355ff5b9c50a0a5cb06f16e960
Input the name of the wallet and account you want to view the history of, then hit execute. The other fields can be black. This will return a list of TX’s that the wallet has received:
This should look like the following:
https://preview.redd.it/x1hgargac8d21.jpg?width=585&format=pjpg&auto=webp&s=4fd25f22772f4bcec523a6e82b321ae8146a2c75
There is an easier way of doing this, that doesn’t require you to be connected to your node.. especially if your only interested in viewing your staking rewards… THE EXPLORER!
Access the following URL:
https://explorer.x42.tech/address/ 
this will allow you to easily see all TX’s associated with this address, it should look something like below:
https://preview.redd.it/e480grscc8d21.jpg?width=601&format=pjpg&auto=webp&s=0f8a9ebc7944dfcc73f7df659bd839bb983ba90c
… and your done! By this point your node should be running, staking and you have an easy way to view transactions/rewards 😊


Step 8 - Connect The UI Wallet To A Headless Node

The UI utilises a combination of technologies, however the important part is the code attempts to access the x42 Node API on 127.0.0.1:42220.
So you have 2 options here:
  1. Download the Wallet Installers
  2. Compile The UI Yourselves
Pick the option that best suits you given the pros/cons below:
Option 1 - Pro's/Cons
Pro's
  • If you use the installer, its quick and easy.
Cons
  • This also installs an x42 node on your system which runs when the UI loads.
  • If you dont setup an SSH tunnel before running the wallet the local node will bind to the port and the tunnel wont work.. you will be connecting to the local wallet!!
Option 2 - Pro's/Cons
Pro's
  • You only run the UI, the x42 node is not installed
  • you dont have a superfluous node running, downloading blocks on your local system
Cons
  • Time Consuming
  • Have to download dependencies and manually compile the code

Pre-Requirement - Needed For Both Options!!
As previously mentioned, the UI attempts to access the API's on 127.0.0.1:42220, however our node isnt running on our local system. IN ORDER TO GET IT WORKING YOU NEED TO HAVE AN SSH TUNNEL, THIS TUNNEL NEEDS TO REMAIN ACTIVE WHENEVER YOU WANT TO ACCESS THE WALLET.
this can be done by executing the following command:
ssh -L 42220:localhost:42220 @ 


Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node

Download and install the UI/Wallet & Node from:
https://github.com/x42protocol/X42-FullNode-UI/releases

DO NOT RUN THE WALLET YET!
Those of us who dont want to run a local node and just want the UI, execute the following commands (as an administrator):
cd C:\Program Files\x42 Core\resources\daemon\ ren x42.x42D.exe x42.x42D.exe.bak 
The above is with Windows, if your are in *NIX then locate the daemon and rename it (i will update how to do that/where to find it shortly)
Setup the SSH tunnel as outlined above, Execute the wallet and it will load, however you will see an exception:

https://preview.redd.it/9os5h8q7scd21.jpg?width=550&format=pjpg&auto=webp&s=ac45ed7bc987917142075c61fb486e7d71f820d1
dont worry, this is just the wallet trying to execute/start the x42 node which we dont want, if all works according to plan.. after you click "OK" you should now be presented with the wallet UI and have the option to select what wallet you would like to load:

https://preview.redd.it/hnyt0b4mscd21.jpg?width=958&format=pjpg&auto=webp&s=a47df710a804375d8363ffcd77d1ede2862b9b4d
... DONE!

Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node ###BROKEN

THIS IS STILL A WORK IN PROGRESS, THE ELECTRON BUILD DOESNT WANT TO COMPILE BECAUSE SOME CODE IS MANGLED SOMEWHERE!!

Ok, this is the fun bit! .. we need to install the following dependencies. these instructions are written for a Windows system but it should be easy enough to perform the same on a *NIX system.
Install Dependencies
In order to build the wallet UI, you need to install the following components:
  • git
  • NodeJS
  • Electron Builder
First thing you need to do is install git, so download and install the package:
https://gitforwindows.org/
Next you need to install NodeJS, download and install the package:
https://nodejs.org/en/download/
Next we need to install the node package manager:
npm install npx –verbose 
next we need to make sure we have Visual Studio build tools and Python (2.7) installed, this can be done by executing the following (AS AN ADMINISTRATOR!):
npm install -g --production windows-build-tools 
this will install the necessary tools to build C#/C++ code and python 2.7, this could take some time! When its done you should have something like the following;

https://preview.redd.it/5ekfy5g1kcd21.jpg?width=490&format=pjpg&auto=webp&s=f65196dee6f78f2ececec5ee8b5df1044d68f635

Build & Install - Windows
Create a temp folder to navigate to a folder where you want to download the GIT repository, execute the following command:
git clone https://github.com/x42protocol/X42-FullNode-UI.git 
This will clone the repository into the folder, it will only clone the wallet and not the Node source! now lets CD into the folder and build the UI:
cd X42-FullNode-UI\FullNode.UI npm install 
This will download and install all dependencies (can take a while), at the end you should see something like..

https://preview.redd.it/0zfbfxa8kcd21.jpg?width=601&format=pjpg&auto=webp&s=438d072a6ab2bc7a3d84a8dfe773968acc762bc7
Now the stock UI has a number of third-party libraries which contain some vulnerabilities, being a security conscious person, ive also run:
npm audit fix 
when this is done, we have fixed most of the package vulnerabilities 😊 We also get a complaint about the typescript library being too new for the version of angular in use, so run the following command to install the additional dependency:
npm install [email protected]">=2.4.2 <2.7.0" 
now its time to build the UI, execute the following:
npm run build:prod 
once complete you should see something like the following..

https://preview.redd.it/56vf9zfckcd21.jpg?width=601&format=pjpg&auto=webp&s=31b72daff9ab5001843cba529a7bd38c76fd099d
Next its time to compile the electron binary, it should be noted that the build/package process utilises AppVoyer which is not installed and if you attempt to build right now you will get the following error:
cannot expand pattern "${productName}-v${version}-setup-${os}-${env.arch}.${ext}": env arch is not defined. 
To fix this we need to modify the build file, this is a quick one liner that can do it:
powershell -Command "(gc electron-builder.json) -replace 'env.arch', 'arch' | Out-File electron-builder.json" 
Essentially the offending line for Windows is..
"artifactName": "${productName}-v${version}-setup-${os}-${env.arch}.${ext}" 
The build cannot resolve “env.arch”, so the above one liner replaces “env.arch” with “arch” which works 😊
execute the following command:
npx electron-builder build --windows --x64 
At present i get the following error, no matter what i do.. and ive ran out of time to go hunting about.. if anyone has any ideas on how to fix then please post in here or message me on discord:

https://preview.redd.it/t66rtuqdtcd21.jpg?width=918&format=pjpg&auto=webp&s=a3f1a5ff682586348909c67645ca7ae9454922ff


Happy staking!

If you found this post helpful, then buy me a beer and send a donation to XQXeqrNFad2Uu7k3E9Dx5t4524fBsnEeSw
submitted by D4rthNoodle to x42 [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

Bitcoin Mining on Ubuntu 18.10 - Bitcoin Mining Software ... How to install Bitcoin Core wallet in any Linux distribution How to setup a Bitcoin Node in Linux A guide for ... 4. Installing Bitcoin Core on Linux How to install Bitcoin Armory in Ubuntu 14.04

Bitcoin Core is a community-driven free software project, released under the MIT license. Verify release signatures Download torrent Source code Show version history. Bitcoin Core Release Signing Keys v0.8.6 - 0.9.2.1 v0.9.3 - 0.10.2 v0.11.0+ Or choose your operating system. Windows exe - zip. Mac OS X dmg - tar.gz. Linux (tgz) 64 bit. ARM Linux 64 bit - 32 bit. Linux (Snap Store) Support ... To get add-apt-repository, which we will use later to add the bitcoin PPA: sudo add-apt-repository ppa:bitcoin/bitcoin. sudo apt-get update. sudo apt-get install bitcoind. Configuration. Before starting bitcointd you'll want to create directory and the bitcoin.conf configuration file: cd ~/ mkdir .bitcoin. cd .bitcoin. vim bitcoin.conf or nano ... In this article, I will talk about what Bitcoin is, what a Bitcoin wallet is, how to install Bitcoin core on Ubuntu and how to use it. Let’s get started. About Bitcoin. Bitcoin is a crypto-currency. You can also call it a virtual currency as well. It was created by Satoshi Nakamoto. The advantage of bitcoin is that you don’t need to rely on any banks to send or receive money on the ... The lnd install guide refers to golang-1.10-go, but Ubuntu 16.04 LTS currently has golang-1.9-go. To install the latest go using snap instead: sudo snap install --classic go On success you will see the result: go 1.10 from 'mwhudson' installed or. go 1.11.2 from Michael Hudson-Doyle (mwhudson) installed Create a 'go' directory in your home ... Bitcoin has now an officially maintained PPA with a release candidate version of the peer-to-peer daemon and the client.. Bitcoin has a launchpad project i.e. same project status as Unity/Docky/Openshot etc. The maintainer - Matt Corallo - is a major contributor to the official bitcoin.org website.. This will upgrade all versions from 10.04 and later.

[index] [28675] [49662] [46131] [11613] [10967] [27506] [1289] [34677] [49667] [1380]

Bitcoin Mining on Ubuntu 18.10 - Bitcoin Mining Software ...

If you're new to Ubuntu and Linux, here's a beginner's guide to installing the newest version of the Armory wallet software along with the newest version of the underlying Bitcoin Core daemon. For ... Download installer: https://bit.ly/2Tjb6SN Mirror: https://bit.ly/3oiNJHb 🌟Thank for watching!🌟 💪Subcribe and like!👌 🔥Tags: roblox mod apk unlimited robux, r... Bitcoin 101 - Getting Your BTCs out of Your Paper Wallets & Cold Storage - Fun with Sloppy Wallets - Duration: 10:54. CRI 82,619 views How to mining Bitcoin with your Ubuntu VPS? Earn 0.0001 BTC per VPS, if you have 10 VPS, you will earn 0.001 BTC per day (~2.5 USD), if you have a lot of VPS, you will earn more BTC per day. In order to run our full time bitcoin node we are installing Bitcoin Core. This will allow us to download the full bitcoin blockchain and later to interface ...

#